High performance condensation silicones for impressions in fixed and removable prostheses.
A Zhermack quality guarantee, for over 35 years.
More economical than addition silicones or polyethers
They are characterized by a good accuracy and an ideal working time/setting time ratio.
Pressure, moisture and heat, which are conditions that prevail when introducing the impression tray in the oral cavity, immediately increase the fluidity of the material and
guarantee an impression taking that is very precise along the edges.
INDICATIONS
Used as a Rubber base impression material.
ADVANTAGES
Reduces mucous compression in the phase of insertion in the oral cavity.
Excellent hardness after setting.
In the two-stage technique, it acts perfectly as a special tray, In double mixing, it adapts to the consistency of low viscosity fluid.
Variable working and setting times according to catalyst quantity (Indurent gel)
Safe disinfection with Zeta 7 Solution and Zeta 7 Spray.
Excellent relation between rigidity and elasticity
Ideal working time/setting time ratio
High flowability and accuracy of wash materials
Putty and wash materials with the same catalyst.
REDUCED MARGIN OF ERROR
Clear color contrast to reduce the risk of error, consequently saving time and material.
BALANCED REACTIVITY
Ideal balance between working time and setting time. (Snap-set effect).
The optimal dosage of the catalyst increases the available working time and reduces contraction
“FLOW CONDITIONING” EFFECT
Increased flowability and extreme dimensional stability are achieved thanks to SAS (Synthetic Amorphous Silicas) high-activity spheroid fillers.
Features
High initial flowability
Green colour
Spearmint flavour
The different scents, from mint to orange, pleasant for the patient and professionals.
Key Specifications
Tech Information
ISO 4823 – ADA 19
Type 0 Putty Consistency
Mixing time
30”
Total working time (23°C/73°F)
1′ 15”
Time in mouth
3′ 15”
Setting time (23°C/73°F)
4′ 30”
Compressive deformation (min-max)
2 -5 %
Elastic recovery
>98%
Dimensional stability (after 24 h)
<-0.2%
High initial flowability and excellent rigidity after hardening for the putties
Thixotropy for the washes
High tear resistance
Packaging
Zhermack Zeta Plus Intro Kit
1 x 900ml Putty
1 x 60ml Catalyst
1 x 140ml Light Body Tube
Direction to Use
STEPS –
Prepare a tooth for a crown.
After applying GC Tray adhesive, Zhermack Zetaplus putty is loaded on the stock tray.
The putty impression is taken.
Using the putty cutter creates a space for the light body.
Inject the Zhermack Zetaplus light body around the prepared tooth, then immediately re-seat the putty tray impression.
The final impression is taken.
There are no reviews yet.