The Bluephase 20i is high-performance LED curing light with a light intensity of 2,000 mW/cm2 offering curing times as fast as 5 seconds.
Bluephase 20i is an LED polymerization light that produces energy-rich blue light. It is used for the polymerization of light-curing dental materials immediately at the dental unit.
INDICATIONS:
With its “Polywave” broadband spectrum, Bluephase is suitable for the polymerization of all light-curing dental materials curing in the wavelength range of 385–515 nm. These materials include restoratives, bonding agents/ adhe-sives, bases, liners, fissure sealants, temporary materials as well as luting materials for brackets and dental-lab materials such as those used in the fabrication of ceramic inlays
ADVANTAGES:
4 modes of operation
Polywave LED featuring “halogen-like” broadband spectrum of 385-515nm suitable for curing all dental materials.
Unrestricted use without clinical limitations.
“Click & Cure” corded back-up power supply, independent of the battery.
Cordless design for ultimate portability.
Seamless construction of the housing for optimum hygiene.
Innovative movement sensor for immediate operation.
The light intensity is maintained at a consistent level during operation. If the supplied 10>8 mm light probe is used, the light intensity has been calibrated to 2,000 – 2,200 mW/cm2 . The use of a light probe other than the one provided has a direct influence on the light intensity emitted.
In parallel-walled light probes (10 mm), the diameter is equal at both ends. In focussing light probes (10>8 mm light probe, Pin-Point light probe 6>2 mm), the diameter of the rear end is larger than that of the light emission window. The incident blue light is thus bundled to a smaller surface, which increases the light intensity emitted. Pin-Point light probes are suitable for the polymerization of confined areas, such as the attachment of veneers prior to excess removal.
For thorough curing, it is necessary to change the light probe.
TECHNICAL SPECIFICATIONS:
Light intensity
2,000 – 2,200 mW/cm2
Dimensions of the handpiece
L=260mm; W=42mm; H=120mm
Max. battery time
approx. 45 min.
(with a new, fully charged battery)
Brand
Ivoclar Vivadent
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.